Voor de U2W Plus dongle-verbinding volgt u de onderstaande stappen voor het koppelen van producten:
Stappen 1. Zorg er eerst voor dat de CarPlay-modus is ingeschakeld op zowel uw auto als iPhone.
Wanneer u op het autoscherm wordt gevraagd om een Apple-apparaat aan te sluiten, sluit u de dongle aan. Je ziet de Bluetooth verschijnen op de auto-interface, terwijl het lampje van de dongle rood blijft.



Stappen 2. Schakel Bluetooth en Wi-Fi in op uw telefoon.
Nadat u het apparaat op de USB-poort van de auto heeft aangesloten, schakelt u Bluetooth en wifi in op uw telefoon. Selecteer vervolgens het Bluetooth-signaal van de iPhone op het scherm van de auto om verbinding te maken met de iPhone. Het rode lampje knippert, wat aangeeft dat het apparaat wordt verbonden.

Stappen 3. Mobiele telefoons zijn succesvol gekoppeld en CarPlay is klaar voor gebruik.
Nadat u het apparaat op de USB-poort van de auto heeft aangesloten, moet u ervoor zorgen dat Bluetooth en Wi-Fi zijn ingeschakeld op uw telefoon. Selecteer vervolgens het Bluetooth-signaal van de iPhone op het scherm van de auto om verbinding te maken met de iPhone. Het rode lampje gaat knipperen, wat aangeeft dat het apparaat wordt aangesloten.
Stap 4. Zorg ervoor dat CarPlay op uw iPhone ingeschakeld blijft totdat het apparaat succesvol is verbonden met uw auto. Zorg ervoor dat CarPlay van zowel uw auto als iPhone is ingeschakeld en ingeschakeld blijft totdat er een succesvolle verbinding tot stand is gebracht.
Ga naar Instellingen >> Algemeen >>CarPlay om de status te controleren
Stappen 5. Wijzig de instelling "Regio" in het menu "Algemeen" om CarPlay in te schakelen.
Als u de optie "CarPlay" niet kunt vinden in het menu "Algemeen" van uw iPhone, kunt u de instelling "Regio" opnieuw instellen om deze dienovereenkomstig te verplaatsen.
Het instellingspad is Instellingen >> Algemeen >> Taal en regio >> Regio
Video uitleg: https://carlinkitcarplay.com/blogs/wireless-dongle-adapter/wireless-dongle-adapter
Bloglink voor iPhone-instellingen: https://carlinkitcarplay.com/blogs/if-you-cannot-get-your-phone-connected-you-can/if-you-cannot-get-your-phone-connected-you-can
WHEN I CONNECT MY CARLINKIT TO CARPLAY AND BRING UP NETFLIX TOYBOX IT SAYS OFFLINE..IT USED TO WORK BUT QUIT..PLEASE HELP
Hi WENDELL,
May I know the model or name of the Carlinkit you have? Please note that only our T-box series support NETFLIX.
Nikki from Carlinkit Carplay Team
(edited)Hola, he comprado vuestro dispositivo Carlinkit CPC200-U2W Plus y funciona bien con mi volkswagen tiguan del 2019 pero cuando lleva unos 5 minutos funcionando se desconecta y el solo se vuelve a conectar…. todo el rato hace lo mismo. Tengo otro Carlinkit instalado en otro vehículo volkswagen y ese funciona perfecto, pero el del tiguan que acabo de comprar no hay manera que se mantenga conectado sin desconectarse. Me podeis ayudar??
Gracias!!
Hi Josep,
Please upgrade the box to the latest version.
Please go to the box web backend and change the wireless settings to channel 149.
Please go to the box web backend and set the video bitrate to 6 and frame rate to 0.
Please go to the box web backend and set the video bitrate to either 2 or 4, and the frame rate to 20.
All of the above solutions have been tried, but the issue still persists. Please try using an additional power supply cable.
Nikki from Carlinkit Carplay Team
(edited)I NEED FIRMWARE U2W Update.img THANK YOU
Hi GUARIDAN,
Please contact support@carlinkitcarplay.com to get the latest FW.
Nikki from Carlinkit Carplay Team
(edited)please could you share the U2W_update file
thanks for your support
Hi Meyer,
Yes, Sure, please contact support@carlinkitcarplay.com to get the latest FW
Nikki from Carlinkit Carplay Team
(edited)I have two dongles for two cars. Once I added the 2nd dongle to my iPhone 12, I have been having issues. Should there be an issue with 2 pairings on same phone as long as they are not in use at the same time? Hope you can help!
Hi Craig,
Yes, as long as they are not used simultaneously, there won’t be any issues with pairing. When you use one of the cars, you just need to manually connect the dongle’s Bluetooth.
Nikki from Carlinkit Carplay Team
(edited)