When trying to access the adapter settings via Safari by entering 192.168.50.100, some users see an error message: “Site can’t be reached.”
This usually happens because the phone is not properly connected to the adapter’s Wi-Fi network.
Here is step-by-Step Solution:
1. Make sure CarPlay is not connected (disconnect if needed).
2. Power on the adapter.
3. nce the indicator light turns on, the device will broadcast a Wi-Fi signal.
4. On your iPhone, go to Wi-Fi settings and connect to the adapter’s Wi-Fi: Wi-Fi Name: VehiConn_****
5. Password: 12345678
6. Once connected, open Safari and enter this IP address: 192.168.50.100
You should now be able to access the adapter’s settings page.
Need a visual guide? Watch this video tutorial for reference:
https://www.youtube.com/watch?v=VEBnlVKnT7s
