0

Your Cart is Empty

(U2W Plus) UPGRADE FIRMWARE OFFLINE -for Carlinkit CPC200-U2W/U2W Plus Dongles Firmware Upgrade by USB Flash Drive

November 24, 2021 2 min read 2 Comments

Warning: We strongly recommend that you do not upgrade while the product is in good working condition. If you must upgrade, please strictly follow our operating instructions. If the product cannot work due to the failure of upgrading, you will need to send products back for repair and bear the corresponding high costs of freight and maintenance!

If the device cannot be connected or recognized, you can use the USB Flash drive to upgrade the firmware. Of course, to avoid malfunctions, it is will be better you upgrade the dongle firmware online. Otherwise, the equipment is likely to become useless. This upgrade method is different from the past, you need to pay 100 % attention to following our upgrade steps, otherwise, the dongle will be dead.

(Very Important note: Do not attempt to connect the adapter to your computer or laptop USB ports. These ports are made to transfer data and will just interrupt the update process and break the device.)

Preparation materials: the dongle, power adapter, USB flash drive.

Steps of how to upgrade the firmware by USB flash drive:

1. Prepare a USB flash drive, format it to FAT32/ Allocation unit size 1024bit or default.offline-upgrade-2 (1)
offline-upgrade-2 (1)
offline-upgrade-2 (1)

2. Download and save U2AW AUTOKIT Update.img file (If you bought the device from carlinkitcarplay.com, you can get the file by sending us an email) on USB flash drive Root directory. 

U2AW_AUTOKIT_UPDATE.img

3. Connect the Carlinkit Dongle (U2W/ U2W Plus) to a USB wall power outlet/ charger. Wait for the solid Red light. Please don’t use the USB port of the car or computer!!

offline-upgrade-2 (5)

4. Insert the USB flash drive into the Carlinkit Dongle and wait at least 4 minutes while the device is being updated (You will see alternative red light and green light on the device and finally it stays red.)

offline-upgrade-2 (5)

5. Plug the dongle into the USB port of the car once the head unit is fully booted.

Connection tutorial: https://carlinkitcarplay.com/blogs/wireless-dongle-adapter/how-can-i-get-my-phone-connected-and-use-wireless-carplay

7. Mobile browser enters 192.168.50.2 to check the newest version.

offline-upgrade-2 (8)

offline-upgrade-2 (8)

offline-upgrade-2 (8)

offline-upgrade-2 (8)

offline-upgrade-2 (8)8. Wait for the new interface to appear on the screen.

To get the newest update firmware file, please email us!

support@carlinkitcarplay.com

Mon-Fri: 9:30 AM - 6:00 PM (UTC+8)


2 Responses

Reply to Tuan

January 21, 2022

“i need firmware update offline to Carlinkit CPC200-U2W plus”

Answer: Hi, We strongly recommend that you do not upgrade while the product is in good working condition. If you must upgrade, please strictly follow our operating instructions.

Tuan

January 21, 2022

i need firmware update offline to Carlinkit CPC200-U2W plus

Leave a comment

Comments will be approved before showing up.